AMCC 9690SA Manual do Utilizador descarregar pdf (Página 24)

Installing the Remote Battery

www.3ware.com 20

easiest to connect the battery power cable to the BBU control

module on the 3ware RAID controller.

Note: You can mount a second battery on the board, if you have

another controller.

Figure 13. Three locations for mounting battery on remote board

Mount the battery in the selected location by snapping it in place.

a Insert the two clips on the top of the battery module into the

two slots at the top edge of positions 2 or 3 (

Figure 14), or

in the holes at the left edge of position 1.

b Press down gently on the battery module until the bottom

clip snaps into place in the lower hole.

22 33

123

22 33

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Sem comentários

AMCC 9690SA Manual do Utilizador Página 24