AMCC 3WARE 9590SE Guia do Utilizador descarregar pdf (Página 72)

Chapter 2. CLI Syntax Reference

66 3ware Serial ATA RAID Controller User Guide

/cx/ux show volumes

This feature only applies to 9000 series controllers.

This command reports the number of volumes in the specified unit. The

number of volumes will normally be “1” unless auto-carving is enabled and/

or a boot LUN was specified.

Example:

//localhost> /c0/u0 show volumes

/c0/u0 volume(s) = 1

show all

This command shows the current setting of all above attributes.

If the auto-carve policy was on at the time the unit was created and the unit is

over the carve size, multiple volumes were created and are displayed at the

end of the summary information. Similarly, if the unit was created using the

3ware BIOS utility 3BM and a size was entered in the Boot Volume Size field,

multiple volumes were created and will be displayed. Note that a volume

created using the Boot Volume Size feature does not have to be used as a boot

volume.

Example:

//localhost> /c0/u1 show all

/c0/u1 status = OK

/c0/u1 is not rebuilding, its current state is OK

/c0/u1 is not verifying, its current state is OK

/c0/u1 is not initializing, its current state is OK

/c0/u1 Cache State = on

/c0/u1 volume(s) = 2

/c0/u1 name = myarray

/c0/u1 serial number = C6CPR7JMF98DA8001DF0

/c0/u1 Ignore ECC policy = on

/c0/u1 Auto Verify Policy = on

/co/u1 Storsave policy = protection

/c0/u1 Command Queuing Policy = on

Unit UnitType Status %RCmpl %V/I/M VPort Stripe Size(GB)

------------------------------------------------------------------------

u1 RAID-0 OK - - - 64K 3576.06

u1-0 DISK OK - - p0 - 298.01

u1-1 DISK OK - - p1 - 298.01

u1-2 DISK OK - - p2 - 298.01

u1-3 DISK OK - - p3 - 298.01

u1-4 DISK OK - - p4 - 298.01

u1-5 DISK OK - - p5 - 298.01

u1-6 DISK OK - - p6 - 298.01

u1-7 DISK OK - - p7 - 298.01

u1-8 DISK OK - - p8 - 298.01

u1-9 DISK OK - - p9 - 298.01

u1-10 DISK OK - - p10 - 298.01

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 109 110

Comentários a estes Manuais

Sem comentários

AMCC 3WARE 9590SE Guia do Utilizador Página 72

Comentários a estes Manuais

Manuais e produtos relacionados com Controladores RAID AMCC 3WARE 9590SE