AMCC 9550SX-8LP Manual do Utilizador descarregar pdf (Página 15)

Installing a Serial ATA RAID Controller

www.3ware.com 11

Save this screw; it will be used to secure the serial 3ware RAID

controller after you have seated it in the slot.

6 Position the card in the slot so that the contacts will mate with

the grooves in the slot, and all pins make proper contact with

the PCI slot pins when pushed into place.

The 3ware RAID controller is keyed to ensure proper

installation into a full-sized 3.3-volt PCI or PCI-X slot.

Make sure that the contacts will mate with the grooves in the

slot.

7 Press down gently on the edge of the 3ware RAID controller

directly above the slot until it is fully seated.

Figure 7. Inserting Controller Into PCI Slot

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Sem comentários

AMCC 9550SX-8LP Manual do Utilizador Página 15